Edit This Page

Exposing an External IP Address to Access an Application in a Cluster

This page shows how to create a Kubernetes Service object that exposes an external IP address.

• Objectives
• Before you begin
• Creating a service for an application running in five pods
• Cleaning up
• What’s next

Objectives

• Run five instances of a Hello World application.
• Create a Service object that exposes an external IP address.
• Use the Service object to access the running application.

Before you begin

• Install kubectl.

• Use a cloud provider like Google Container Engine or Amazon Web Services to create a Kubernetes cluster. This tutorial creates an external load balancer, which requires a cloud provider.

• Configure kubectl to communicate with your Kubernetes API server. For instructions, see the documentation for your cloud provider.

Creating a service for an application running in five pods

1. Run a Hello World application in your cluster:

    kubectl run hello-world --replicas=5 --labels="run=load-balancer-example" --image=gcr.io/google-samples/node-hello:1.0  --port=8080
   

   The preceding command creates a Deployment object and an associated ReplicaSet object. The ReplicaSet has five Pods, each of which runs the Hello World application.

2. Display information about the Deployment:

    kubectl get deployments hello-world
    kubectl describe deployments hello-world
   

3. Display information about your ReplicaSet objects:

    kubectl get replicasets
    kubectl describe replicasets
   

4. Create a Service object that exposes the deployment:

    kubectl expose deployment hello-world --type=LoadBalancer --name=my-service
   

5. Display information about the Service:

    kubectl get services my-service
   

   The output is similar to this:

    NAME         CLUSTER-IP     EXTERNAL-IP      PORT(S)    AGE
    my-service   10.3.245.137   104.198.205.71   8080/TCP   54s
   

   Note: If the external IP address is shown as <pending>, wait for a minute and enter the same command again.

6. Display detailed information about the Service:

    kubectl describe services my-service
   

   The output is similar to this:

    Name:           my-service
    Namespace:      default
    Labels:         run=load-balancer-example
    Selector:       run=load-balancer-example
    Type:           LoadBalancer
    IP:             10.3.245.137
    LoadBalancer Ingress:   104.198.205.71
    Port:           <unset> 8080/TCP
    NodePort:       <unset> 32377/TCP
    Endpoints:      10.0.0.6:8080,10.0.1.6:8080,10.0.1.7:8080 + 2 more...
    Session Affinity:   None
    Events:
   

   Make a note of the external IP address exposed by your service. In this example, the external IP address is 104.198.205.71. Also note the value of Port. In this example, the port is 8080.

7. In the preceding output, you can see that the service has several endpoints: 10.0.0.6:8080,10.0.1.6:8080,10.0.1.7:8080 + 2 more. These are internal addresses of the pods that are running the Hello World application. To verify these are pod addresses, enter this command:

    kubectl get pods --output=wide
   

   The output is similar to this:

    NAME                         ...  IP         NODE
    hello-world-2895499144-1jaz9 ...  10.0.1.6   gke-cluster-1-default-pool-e0b8d269-1afc
    hello-world-2895499144-2e5uh ...  0.0.1.8    gke-cluster-1-default-pool-e0b8d269-1afc
    hello-world-2895499144-9m4h1 ...  10.0.0.6   gke-cluster-1-default-pool-e0b8d269-5v7a
    hello-world-2895499144-o4z13 ...  10.0.1.7   gke-cluster-1-default-pool-e0b8d269-1afc
    hello-world-2895499144-segjf ...  10.0.2.5   gke-cluster-1-default-pool-e0b8d269-cpuc
   

8. Use the external IP address to access the Hello World application:

    curl http://<external-ip>:<port>
   

   where <external-ip> is the external IP address of your Service, and <port> is the value of Port in your Service description.

   The response to a successful request is a hello message:

    Hello Kubernetes!
   

Cleaning up

To delete the Service, enter this command:

kubectl delete services my-service

To delete the Deployment, the ReplicaSet, and the Pods that are running the Hello World application, enter this command:

kubectl delete deployment hello-world

What’s next

Learn more about connecting applications with services.